Important factors in choosing a pneumatic actuator brand

Choosing the best pneumatic actuator brand depends on several factors. Here are some important points to help you make this choice:

load type

Tensile load vs. Compressive load:
Tensile Load: You usually need actuators that can generate force in the direction of tension. This type of load is used in applications such as pushing an object forward.
Push-pull: These actuators are used to apply downward pressure and remove the load.

Power and size

Choosing the right force: Pneumatic actuators are classified based on the force they produce. To calculate the force, consider the cylinder diameter and the input air pressure.
Actuator size: Make sure the actuator dimensions match your installation space and operational needs.

speed of action

Calculation of travel time: The speed of the actuator depends on the cylinder volume and the inlet air pressure. Increasing the pressure usually results in an increase in the operating speed of the actuator. Typical actuator speeds are usually in the range of 0.1 to 1 m/s.
Operational criteria: This is crucial if you need high speeds for a specific application, such as automated manufacturing systems.

work environment

Environmental conditions: If the actuator is located in environments with high or low temperatures, you should use temperature-resistant models. Also, in chemical or neutral environments, corrosion-resistant materials should be selected.
Water and dust protection: With regard to IP (protection degree) requirements, ensure that the actuator in question has the appropriate degree of protection.

Control and installation

Control methods: The choice between traditional pneumatic control systems or modern electronic systems is very important. Digital actuators allow for more precise control.
How to install: Check how the actuator is installed, whether it requires special supports and adjustments.

cost

Compare Prices: The price of a pneumatic actuator brand can range from a few hundred dollars to several thousand dollars. The cost may also include installation and maintenance costs.
Cost optimization: To reduce long-term costs, focus on quality rather than buying cheap actuators that may require more maintenance.

Life and maintenance

Lifespan: Pneumatic actuators typically have a longer lifespan than other types. However, some may require periodic maintenance.
Maintenance questions: Are the moving parts easily replaceable? Do they require regular lubrication and cleaning?
Energy efficiency: Models that are more efficient reduce energy costs and help improve overall performance.

ATCOFlo Pneumatic Actuators

Atcoflow Turkish pneumatic actuators with EX standard and aluminum body are a very suitable choice for industries that want to experience high quality at a lower cost than European products. These actuators have unique features that distinguish them from other competitors:

To purchase Atcoflow pneumatic actuators, visit the products page.

Salient Features of Atcoflow Actuators

Aluminum body: Using aluminum in the construction of the body, in addition to reducing weight, increases the strength and durability of the device in various environmental conditions.
Quality steel springs: These springs ensure the reliability of the actuators in repeated and intense operations and contribute to their longer lifespan.
Robust stainless steel hub: The stainless steel hub prevents rust and increases the actuator’s durability in conditions where steam or liquids are present.
Star bottom hub design: This design makes it easy to install the actuator on dampers and valves with different shaft sizes. Using an adapter, you can connect it to any standard shaft size.
You receive these adapters from us for free when you purchase!

Important points in choosing the best pneumatic actuator

Choosing the best pneumatic actuator depends on several factors. Here are some important points to help you make this choice:

Load type and size: Make sure the actuator can handle the required load and torque. It is very important to consider the load requirements.
Fluid Type: Choose the most appropriate actuator based on the type of fluid you are controlling. This selection can be based on pressure, temperature, and material type.
Environmental conditions: The actuator must be able to operate well in a variety of temperatures and humidity. Make sure that Atcoflow products are compatible with your environmental conditions.
Installation System: Easy and quick installation can save time and money. The Atcoflow star bottom hub design helps with this.
Cost: Prices should be considered in relation to the quality and performance of the actuator. Atcoflow actuators are a good option at an economical price.
Warranty and after-sales service: Make sure the supplier offers a good warranty and service. This support can help you when you need repairs or replacements.

Exclusive agency

To purchase the Atcoflow pneumatic actuator brand, you can visit Future Technologies Development, the exclusive representative of this brand in Iran. This representative allows you to purchase Atcoflow quality products with complete confidence and proper after-sales service.

Pneumatic actuators SIRCA Italy

SIRCA pneumatic actuators from Italy are one of the highest quality choices on the market. The AP series of this brand is an ideal choice for environments that require actuators with a near-zero error rate and very high accuracy, due to its compliance with the valid EX, CE standards as well as SIL2 and SIL3 standards. This feature makes SIRCA actuators suitable for use in sensitive industries and special applications.

To purchase Circa pneumatic actuators, visit the products page.

Salient Features of SIRCA Actuators

High quality standards: SIRCA actuators are designed with SIL2 and SIL3 standards for high safety industries, ensuring correct and accurate operation.
Star Bottom Hub Design: The bottom hub of this actuator model is specifically designed to facilitate installation on dampers and valves with different shaft sizes. This unique design allows you to easily install the actuator on any standard shaft size.
You receive these adapters from us for free when you purchase!

Important points in choosing the best pneumatic actuator

To choose the most suitable pneumatic actuator, you need to consider several factors:

Load type and size: Make sure the actuator is capable of handling the required load and torque.
Fluid Type: Depending on what type of fluid the actuator is designed to control, you should choose the most appropriate option.
Environmental conditions: The actuator must perform well in a wide range of temperatures and humidity. For this reason, the design features and materials used are important.
Mounting System: SIRCA’s star-shaped bottom hub design makes these actuators easy to install and replace.
Cost: Comparing cost and quality can help you make the optimal choice.
Warranty and after-sales service: Make sure the supplier offers proper service and a valid warranty.

Exclusive agency

To purchase SIRCA pneumatic actuator brand products, you can visit Toseeh Fenun Atiyeh Company, the exclusive representative of this brand in Iran. This company will help you make the best choice based on your needs by providing appropriate services and technical advice.